Sigma K2 Hand Pumps

Water Filters & Purification Equipment		Your Total Water Solution.

Industrial - Custom Services\| Residential & Commercial \| Request Info \| Site Map \| All prices in CDN Dollars



Sigma K2 Hand Pump
The Sigma K2 is a double acting semi-rotary hand wing pump. The simple robust design of the Sigma K2 incorporates quality materials and workmanship to guarantee a long and effective service life. The body of the Sigma K2 is cast iron, the wing piston assembly and suction divider are brass and the shaft is steel. $299.00 CDN

Features of the Sigma K2 Hand Pump:

The inlet flange, outlet flange, and mounting lugs are reinforced to prevent breakage
Automatic settlement of the wings is assured by the unique tapered internal body design
Each pump is tested to a suction lift of 7 meters of water and 20 meters of discharge head
A drain plug allows water to be drained if the unit will be unused
A drain plug allows water to be drained if the unit will be unused for extended periods of time, or if there is a risk of freezing
Can handle fluids up to 80 degrees C (176 degrees F)

Applications of the Sigma K2 Hand Pumps:

Transfer of clear light fluids in the marine, petrochemical, construction, agriculture and automotive industries
Use in locations where there is no electricity
A reliable back-up to an electric pump in case of power failure
Pull water through a submersible pump (see diagram to left)
Pressurize a tank so there is water at the taps

Operation of the Sigma K2 Hand Pump:

The handle moves back and forth in a 110 degrees arc, which in turn causes the wing piston with flap to semi-rotate within the body.

The suction divider with flaps operates as the inlet check valve.

The pump discharges fluid on both strokes of the handle.

The pump must be bolted to a strong vertical surface with the 2 mounting lugs provided.

The handle can be installed either pointing up, down, left or right.

Note: Sigma pumps that are used for water must be protected from rust whenever they will be unused for extended periods of time. Cooking oil, glycerine or mineral oil is nontoxic and can be pumped through the unit via the drain plug for this purpose.

Specifications of the Sigma K2 Hand Pump:

Weight	8 kg (18 lbs)
Capacity	5 gallons per minute (22.5 liters per minute)
Plumbing connection	1" female pipe thread
Maximum discharge pressure	37.5 psi
Maximum discharge height	25 m (82')
Maximum suction lift	7 m (22')* (see suction lift chart below)

Suction Lift Chart - suction lift is the vertical distance from the pump to the surface of the water:

Altitude	Suction Lift
Sea level	22.0'
1000'	20.8'
3000'	18.4'
5000'	16.0'
7000'	13.6'
9000'	11.2'

Dimensions:

	D - 170 mm (6.8")	a - 145 mm (5.8")
	b - 60 mm (2.4")	i - 10 mm (0.4")
	k - 170 mm (6.8")	v - 230 mm (9.2")
	l - 200 mm (8.0")	o - 13 mm (0.5")
	p - 360 mm (14.4")	u - 30 mm (1.2")
	c - 75 mm (3.0")	d - 9.5 mm (0.4")

The pump comes with a one-year limited warranty and replacement parts are available.

$299.00 CDN


Back To Top	Shipping & Return Policy	Click here to order on-line

Victoria (Head Office):
524 William St.
Victoria, BC
V9A 3Y9
T: 250-412-1110
F: 250-383-6990

Vancouver:
T: 604-630-1114
F: 604-629-0879

Courtenay:
#212-2459 Cousins Ave.
Courtenay, BC
V9N 3N6
T: 250-339-6914
F: 250-331-0889

All prices are in Canadian dollars, are subject to change and may be subject to taxes. Freight and/or brokerage fees may be added. Return policy - All equipment must be in original packaging. 20% restocking fee applies. No returns on used filters/membranes/bulbs. Return shipping is the responsibility of the purchaser.