|
Hard water contains
dissolved calcium and magnesium which build up inside your water heater,
plumbing fixtures and appliances. The minerals also react with soap to
form a scum which appears as bathtub ring, greys your laundry and leaves
your hair dull and your skin itchy. Iron water leaves yellow, orange or
brown stains on your laundry, sinks, tubs and toilets.
Iron Guard contains
a bed of fine mesh ion exchange resin beads. As water passes through the
bed, calcium and magnesium, the hardness minerals, and any clear or red
water iron are removed and held by the resin.
The Iron Guard Plus
contains calcium carbonated in addition to the fine mesh ion exchange
resin. This media combines to raise low pH water to enable the resin to
remove hardness and red water iron.
Eventually, the resin
beads become saturated and must be regenerated. A brine solution is drawn
into the bed to drive out the accumulated minerals. This process is called
ion exchange. After the minerals and brine are rinsed out with fresh water,
the regenerated resin is ready to soften your water again. The demand
regeneration control valve includes a metering system which monitors your
soft water use, regenerating only when necessary based on your water usage.
Consequently, you save salt, water and money.
Features
- Programmable composite
meter control valve guaranteed for 5 YEARS
- Heavy duty fiberglass
tank and brine tank guaranteed for LIFE
- Bypass valve for
ease of installation and service
- Timed brine refill
with brine safety valve provides dual assurance of accurate brine level
and salt use
- Tank jacket reduces
condensation problems
- Contemporary styling
in an attractive smoke white finish
|
