Water Filters & Purification Equipment		Your Total Water Solution.
Industrial - Custom Services| Residential & Commercial | Request Info | Site Map | All prices in CDN Dollars

'Pneumatic Dipstick' Level Gauge
No power – No wiring - Simple to install – Easy to use
	For remote readout of water levels in above and below ground vented storage tanks . Add this to your system where visual inspection or a manual dipstick is inconvenient, awkward or not possible. There is no limit to the horizontal distance between the storage tank and level gauge, and no limit to the vertical separation. The storage tank can be above or below the gauge location. The gauge is can be used for: Rainwater Catchments Delivered Water Shallow Wells Water Table Measurement Holding Tanks Suitable for water depths up to 8 feet The heart of the system is the high sensitivity diaphragm type altitude/pressure gauge that reads directly in inches of water (full scale: 100 inches or 3.6 psi). $289.00 each CDN funds

How the gauge works The water level in the dip tube is normally at the same level as the water in the tank. The pressurizing bulb pushes air into the tube which increases the pressure in the tube. As the pressure increases, the water in the dip tube is pushed downward until it is completely expelled from the tube. The pressure reached to completely expel the water is the same as the water pressure at the bottom of the tank. (The water pressure at the bottom increases as the depth of water increases.) The reading on the gauge shows the pressure in inches of water which is the same as the depth in the tank. Accuracy of the gauge is approximately 2%. Note: 1 p.s.i. = 28 inches of water depth. The vertical position of the tank (such as in the ground, on the roof or up a hil) has no effect on the measurement.

Pre-Assembled Kit Includes: High sensitivity diaphragm type pressure gauge Full scale 100” of water depth 2½” dial Latex rubber hand pressurizing bulb Air flow control valve Mounting bracket and screws 100’ - 3/8” vinyl tubing Sinker weight for end of dip tube $289.00 each CDN funds

Back To Top	Shipping & Return Policy	Click here to order on-line

Home | Photo Gallery | Privacy Policy | Secure Order Form| Pay Invoice | Contact Us | Watertiger Blog |
	Victoria (Head Office): 524 William St. Victoria, BC V9A 3Y9 T: 250-412-1110 F: 250-383-6990 Vancouver: T: 604-630-1114 F: 604-629-0879 Courtenay: #212-2459 Cousins Ave. Courtenay, BC V9N 3N6 T: 250-339-6914 F: 250-331-0889 All prices are in Canadian dollars, are subject to change and may be subject to taxes. Freight and/or brokerage fees may be added. Return policy - All equipment must be in original packaging. 20% restocking fee applies. No returns on used filters/membranes/bulbs. Return shipping is the responsibility of the purchaser.