Waterite
ACF Activated Carbon Filter Specifications
Unpleasant tastes
and odours caused by chlorine or organic substances, such as decayed vegetation
and run-off are adsorbed by quality activated carbon. Occasional backwashing
is necessary to free the filter bed or impurities and ready it for operation
again.
| |
Model
#
|
|
WTR-ACF10
|
WTR-ACF15
|
WTR-ACF20
|
WTR-ACF30
|
| Carbon
(Cu ft) |
1.0
|
1.5
|
2.0
|
3.0
|
| Flow
rates (USGPM) |
Service |
2
|
3
|
4
|
5
|
| Peak |
4
|
6
|
8
|
10
|
| Backwash |
4
|
5
|
7
|
10
|
| Fiberglass
Tank Size (Inches) |
10
x 54
|
10
x 54
|
12
x 48
|
14
x 65
|
| Price
CDN funds |
$980.00
|
$1,140.00
|
$1,390.00
|
$1,695.00
|
Waterite
NextSand (Multimedia) Filter Specifications
Suspended particulate
matter, such as clay and slit, which gives water a cloudy appearance,
is trapped in the filter bed to produce clean, clear water. A radically
high performance silt, sediment, and turbidity filtration media called
NextSand filters out physical impurities which can cause damage to your
plumbing fixtures or cloud your water.
| |
Model
#
|
|
WTR-MMF15
|
WTR-MMF20
|
WTR-MMF30
|
| Media
(Cu ft) |
1.5
|
2.0
|
3.0
|
| Flow
rates (USGPM) |
Service |
7
|
9
|
13
|
| Peak |
11
|
16
|
21
|
| Backwash |
8
|
12
|
16
|
| Fiberglass
Tank Size (Inches) |
10"
x 54"
|
12"
x 48"
|
14"
x 65"
|
| Price
CDN funds |
$1,290.00
|
$1,400.00
|
$1,720.00
|
Waterite
Neutralizing Filter Specifications
Waterite neutralizing
filters contains special media which raises the pH of acidic water and
neutralizes its acidic characteristics. In addition to protecting pipes,
plumbing fixtures and appliances, this filter also facilities the removal
of iron and manganese by raising the pH to enable an iron filter to be
used. After one or two years, additional media may be required.
| |
Model
#
|
|
WTR-NF10
|
WTR-NF15
|
WTR-NF20
|
WTR-NF30
|
| Media
(Cu ft) |
1.0
|
1.5
|
2.0
|
3.0
|
| Fiberglass
Tank Size (Inches) |
8
x 47
|
9
x 48
|
10
x 54
|
12
x 52
|
| Flow
Rates |
Contact
us for sizing
|
| Price
CDN funds |
$900.00
|
$985.00
|
$1,180.00
|
$1,420.00
|
Peak flow rates intended
for intermittent use only (10 minutes or less) and are for residential
applications only.
- Do not use peak
flow rate for commercial applications or for a continuous rate when
treated water supplies are geothermal heat pump, swimming pool, etc
- At the stated service
flow rates, the pressure drop through these devices will not exceed
15 psig.
- For satisfactory
operation, the pumping rate of the well system must equal or exceed
indicated backwash flow rate.
- The manufacturer
reserves the right to make product improvements which may deviate form
the specifications and descriptions stated herein, without obligation
to change previously manufactured products or to note the change
- For commercial
sizing please contact our office.
|
