Front View
Standard Features:
- Produces 5,000 US Gallons Per Day
- Three 4" x 40" TFC membranes
- One 1.5 HP multistage pump and motor, 110 or 220 volt, 50 or 60 hertz and 1 phase
- Frame is aluminum white powder coated, corrosion resistant and light weight
- One 4.5" x 20" 5 micron sediment, one 4.5" x 20" 1 micron sediment and one 4.5" x 20" carbon block pre-filters
- Two 2.5" 0-300 psi panel mount and two 1.5" 0-160 psi top mount gauges
- One low pressure switch - Safety device to protect the pump from running dry when there is insufficient feed water pressure
- One solenoid valve with manual override. 110 or 220 Volt and 50 or 60 Hertz
- One 1/2" stainless steel needle manual flush valve - Regulates the product to waste ratio (system recovery)
- One computer controller. 110 or 220 volt with pre-treat lockout, tank full contacts, low pressure monitoring and alarm
- One product water (0-10 GPM) and one waste water (0-10 GPM) flow meters
- One panel mount TDS meter
- One manual on/off
Optional Features:
- Stainless Steel Membrane Housings - $150 per housing
- High Pressure Switch - $95.00
- Float Switch - $80.00
- Concentrate Re-Circulate - This feature offers a higher recovery rate for the system by taking a percentage of the waste water and feeding it back into the system - $140.00
Back view
