Front
View
Standard Features:
- Twenty 4" x 40" TFC membranes
- One Grundfos 5-7 HP Motor and stainless steel pump
- Frame is aluminum white powder coated, corrosion resistant and light weight.
- 32" 10 micron bag-type and 2.5" x 40" 5 micron cartridge-type sediment filter
- One 30 gallon chemical injection systems
- Two 2.5" 0-300 psi panel mount and two 1.5" 0-160 psi top mount gauges
- One low pressure switch - Safety device to protect the pump from running dry when there is insufficient feed water pressure.
- One solenoid valve with manual override. 220 volt, 60 hertz.
- One 1/2" stainless steel needle manual flush valve - Regulates the product to waste ratio (system recovery)
- One computer controller. 220 volt with built-in TDS monitor, pre-treat lockout, tank full contacts, magnetic motor started, low pressure monitoring and alarm
- One product water (0-20 GPM) and one waste water (0-20 GPM) flow meters
Optional Features:
- Stainless Steel Membrane Housings - $150.00 per housings
- High Pressure Switch - $95.00
- Float Switch - $90.00
- Concentrate Re-Circulate - This feature offers a higher recovery rate for the system by taking a percentage of the waste water and feeding it back into the system - $140.00
- Autoflush - This feature will flush the systems' membranes with the feed water thus extending membrane life - $375.00
